Your trailer was pre-wired for the Furrion Vision S system like the # FOS43TASF that you mentioned. This setup has the smallest monitor size of the options available at 4.3 inches but it will work great. For a larger 5 inch screen you'd want the part # FOS05TASF.
Another great option is the versions of these kit that has side cameras as well like the # FCE48TASL-05 with 5 inch screen. view full answer...
The Forest River trailers are prewired for the Furrion camera systems. The parts your referenced are actually their older models they have discontinued. We have 3 size options available with different added options as well. I recommend using the 5 inch or 7 inch screen because it allows you to view multiple cameras simultaneously if you will be using more than one.
Here are all your options to work with the pre-wiring of your trailer:
-Furrion Vision S Wireless RV Backup Camera System... view full answer...
I spoke with Advent and they said the only fix is to use the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners # ACRG15. This will remove the Coleman from the equation allowing for the advent upper unit to communicate with the advent control box and the advent thermostat.
They go onto say that there is no way of troubleshooting the way the Advent, Coleman and Coleman adapter all work together, unfortunately. view full answer...
The Lippert Turning Point has a specific bolt pattern that only has one replacement so far, the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY48GR. This is a gooseneck adapter though so you'd have to switch out the hitch for a gooseneck ball for this to work. The torsion head will help reduce road shock and chucking transferred to your truck so it is worth considering, but you'll also be moving your pivot point back to the truck so you could run into clearance issues if... view full answer...
If you had 3 inch brackets it would look like you have a lift kit basically already installed on your trailer. I attached a picture of the # K71-724-02 installed that you can compare to what you have now to see if your setup looks like it would fit well. view full answer...
The CE Smith Keel Roller For Boat Trailers # CE29505 you were looking at does not have a specific weight capacity as it will not carry the fully weight of your 1996 Champion 552 at any time when loading it on your trailer, so it will work just fine.
The # CE29505 should just touch the bottom of the boat to make it easier for the boat to be loaded straight on your trailer, but the bunk boards will be carrying the brunt of the weight of the boat.
I included a video of the # CE29505 for... view full answer...
The Torflex Lift Kit - Tandem Axle - 2-7/8" Lift # K71-724-02 is a fit for your trailer as long as the brackets on top of the axle are not 3 inches tall between the axle bar and the trailer frame. The tall bracket is basically already the lift that is compatible but most torflex axles do not have that bracket. I have attached a photo with the taller brackets circled that will not be compatible. The other options will be compatible. view full answer...
It is possible that the Replacement Key For Global Link RV Locks # 295-000067 will work with the locks on your 2019 Forest River Rockwood 5th Wheel, but we have no way to confirm this.
You will need to look for the key code on the key for your lock and match it up to the replacement keys offered. The # 295-000067 you were looking at is a replacement for code 341 so if this matches your keys this will be the correct replacement for you.
If you have a different key code just let me know. view full answer...
I would be happy to help!
For your 2017 Ford F-250 with the Short Bed I recommend going with the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches # RP87FR as this rail kit is the exact same as the OEM puck system and will allow you to use any 5th wheel hitch designed for Fords OEM pucks.
Then for the 5th wheel hitch I recommend going with the B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package # BWRVK3370. This hitch is made... view full answer...
Your trailer looks awesome!
The Road armor equalizers # LC696740 and Equa-Flex Cushioned Equalizers # LC279687 are both pretty similar in performance even though the Road Armor has two dampers.
The main difference is the size of the equalizers. The Road Armor # LC696740 is 6" long measured from the center of one horizontal mounting hole to the center of the other horizontal mounting hole, and 3-1/2" from the center of the upper hole the center line of the two lower mounting holes as shown... view full answer...
I am not extremely familiar with the Surburban Water Heaters but after some research it appears they have a two-in-one drain valve/anode rod. Although we do not have a direct replacement for this it looks like others that were having trouble finding this either did away with the anode rod and just installed a drain valve or did away with the drain valve and installed the anode rod.
If you want to do away with the anode rod and just use a drain valve then you can obtain part # A10-4003VP... view full answer...
Hey Charles, for your 2004 Forest River the only hitch options we have are multi-fit hitches like the Curt part # 13703 which basically fits all frame styles that are between 22 and 72 inches apart. view full answer...
Your Forest River Rockwood is pre-wired for a Furrion camera system, but these do require the use of the Furrion monitors, and there isn't an option that will allow you to use your Chevy monitor with this camera system.
So, if you are okay with using a separate monitor then you can choose from the following options, which have the same camera, with the only difference being the size of the monitor:
- 4.3" Monitor: Furrion Vision S Wireless RV Backup Camera System # FOS43TASF
- 5: Monitor:... view full answer...
Since you know that your 4.4k axle has the bearings # L44649 and # L68149 those would be the correct replacement bearings for you to go with. While the inner diameters of some bearings can be the same the cone side would be different which would prevent some bearings from fitting into the hub. In this situation you need to stick with the same bearing numbers. view full answer...
The camera can physically be moved to adjust the up and down angle by using a firm grip on the camera and pushing it up or pulling it down.
It will not let you adjust side to side and there is no adjustment in the unit controls to move the camera around.
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF. view full answer...
Yes, it will. The 5th Airborne Custom Wedge for Husky / Valley Fifth Wheels item # SWW-04 is exactly what you need for your Valley 7054 Sliding 5th wheel hitch. view full answer...
The only way to know for absolute certainty what gears you need for your 2007 Rockwood Signature Ultra Lite is to know the exact system you currently have. Manufacturers like Forest River who manufactured your RV did not keep track of all the components they used on every camper and would often switch parts during a model years production if they ran out of supply or switched to a different manufacturer for that particular component. Also as the trailer is 17 years old now the parts could... view full answer...
Thanks for the photo! I can now see the issues you are having trying to install a trailer hitch on your 2019 Forest River Rockwood Ultra Lite Fifth Wheel. That said, the brackets for the Adjustable Width Trailer Hitch Receiver part # 13703 and the Adjustable Width Trailer Hitch Receiver part # C13704 are too large to attach to the square tubing used to attach your bumper and this square tubing would get in the way if you tired to mount the hitch to the frame underneath.
Therefore the... view full answer...
I'm sure we can get you a hub assembly for your 2006 Rockwood Ultra lite 2606, but we just don't have any way of knowing off-hand or cross-referencing what hubs that trailer needs. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.
If you are unable to find them, you need to use a digital caliper and measure your spindle... view full answer...
A single stage regulator can work just fine like with the Camco Regulator part # CAM59013 that you referenced. But if there's a very large distance between the tank and the appliances that is when a dual stage regulator makes the most sense like with a dual stage regulator part # 108220. view full answer...
Go To Results